Order in the next 00:00:00
for Same Day Dispatch
Sync Energy Load Management Kit for EVS and EVT Chargers
SYNCEVA120CT1
2 Years Warranty
Free Delivery on orders over £150
| SKU | SYNCEVA120CT1 |
|---|---|
| Brand | Sync Energy |
| OZEV Approved | No |
| EV Power Source | Single Phase |
| EV Charging Capacity (kW) | 7.4kW |
| EV Charger Type | Level 2 (240V) |
| EV Connector Type | Type 2 |
| EV Cable Length | * |
| EV Cable | Untethered |
| Product Length | - |
| Product Width | * |
| Depth | * |
| EAN Code | * |
| Manufacturer's Part Number (MPN) | EVA120CT1 |
| Manufacturer's Product Name | CT CLAMP 120A FOR EVX7 CHARGER |
In stock
Only 10 left
Product Description
Sync Energy Load Management Kit for EVS and EVT Chargers
The Sync Energy EVA120CT1 load management kit supplies a CT clamp for compatible EVS, EVT and Wall Charger 2 chargers. It measures incoming electrical load so a correctly configured charger can manage its demand alongside other loads at the property.
Key features
- For compatible EVS, EVT and EVWC2 charger models
- Supports dynamic load management
- 0-120A load setting within the compatible charger
- Pre-wired with a 1m lead
- Suitable for up to 35mm² double-insulated cable
- Intended for use with EV+ two-core cable
Choosing this product
At home, charging demand needs to be considered alongside appliances and other electrical equipment. On a workplace or hospitality site, the same principle helps the installer plan charging around the available supply. The CT clamp provides the measurement input for the compatible charger; it does not increase the capacity of the incoming electrical service.
Product specifications
| Manufacturer reference | EVA120CT1 |
|---|---|
| Product type | Load management CT clamp kit |
| Supported charger families | EVS / EVT / EVWC2 |
| Load setting range | 0-120A within the charger |
| Pre-wired lead | 1m |
| Cable suitability | Up to 35mm² double-insulated cable |
Compatibility and installation
The kit must be installed and configured to the charger instructions by a qualified installer. Check whether the chosen charger already includes a CT clamp before ordering an additional kit. Three-phase Wall Charger 2 load balancing requires three CT clamps, one per phase. This is not a complete multi-charger management hub.
Sync Energy Load Management Kit for EVS and EVT Chargers
The Sync Energy EVA120CT1 load management kit supplies a CT clamp for compatible EVS, EVT and Wall Charger 2 chargers. It measures incoming electrical load so a correctly configured charger can manage its demand alongside other loads at the property.
Key features
- For compatible EVS, EVT and EVWC2 charger models
- Supports dynamic load management
- 0-120A load setting within the compatible charger
- Pre-wired with a 1m lead
- Suitable for up to 35mm² double-insulated cable
- Intended for use with EV+ two-core cable
Choosing this product
At home, charging demand needs to be considered alongside appliances and other electrical equipment. On a workplace or hospitality site, the same principle helps the installer plan charging around the available supply. The CT clamp provides the measurement input for the compatible charger; it does not increase the capacity of the incoming electrical service.
Product specifications
| Manufacturer reference | EVA120CT1 |
|---|---|
| Product type | Load management CT clamp kit |
| Supported charger families | EVS / EVT / EVWC2 |
| Load setting range | 0-120A within the charger |
| Pre-wired lead | 1m |
| Cable suitability | Up to 35mm² double-insulated cable |
Compatibility and installation
The kit must be installed and configured to the charger instructions by a qualified installer. Check whether the chosen charger already includes a CT clamp before ordering an additional kit. Three-phase Wall Charger 2 load balancing requires three CT clamps, one per phase. This is not a complete multi-charger management hub.
| SKU | SYNCEVA120CT1 |
|---|---|
| Brand | Sync Energy |
| OZEV Approved | No |
| EV Power Source | Single Phase |
| EV Charging Capacity (kW) | 7.4kW |
| EV Charger Type | Level 2 (240V) |
| EV Connector Type | Type 2 |
| EV Cable Length | * |
| EV Cable | Untethered |
| Product Length | - |
| Product Width | * |
| Depth | * |
| EAN Code | * |
| Manufacturer's Part Number (MPN) | EVA120CT1 |
| Manufacturer's Product Name | CT CLAMP 120A FOR EVX7 CHARGER |
Write Your Own Review